Jump to content

Selling Ultimaker S5, Gently Used, Washington DC area $4,995


Recommended Posts

Posted (edited) · Selling Ultimaker S5, Gently Used, Washington DC area $4,995

I am selling my Ultimaker S5. Lightly used, purchased March 2019. I am a hobbyist and while the S5 is a great printer, it is more than I need and I have decided to sell it. It has only used a couple of reels of filament overall. Screen shots of the total usage are below.

 

List price $4,995

 

Included:

- Ultimaker S5

- Ultimaker filament: About a quarter reel of Black PLA, half reel of Natural PVA, and about 80% of a reel of white TPU.

- 4 print cores total: Two AA 0.4 and two BB 0.4 (S5 normally comes with one AA and one BB, I purchased one extra of each, so this includes two extra cores). See my note below about the extra BB core. 

- Original box

 

Condition:

- Printer is overall in excellent condition and works well, especially with PLA and TPU

- Only issue I’ve had with the S5 is using the dual extrusion with the PVA filament. It may be a combination of me being an amateur or perhaps humidity in the room, but I haven’t had reliable performance with PVA. Otherwise the printer is excellent. Dual extrudes great with other filament types like TPU. 

- Before listing, I cleaned and tested 3 of the 4 print cores. My extra BB 0.4 core still seems to be gummed up - you may need to do a few more cleaning cycles. For the purposes of this listing, consider the extra BB core to be an “extra” that should work after more cleaning cycles, but I am not guaranteeing it. It’s basically an extra that I’ve thrown in for free.

- I recommend when you receive the printer to do a full calibration cycle etc. 

 

For your protection and for mine, I am planning to transact via PayPal for Goods and Services or similar. 

 

I am based in the Washington DC area, and pickup is preferable but if we need to ship in the US, we can work it out. 

 

BE4F2B77-AAB0-49F2-AE80-5A002B8A1967.thumb.jpeg.6c106f2339a6a035de3f14e10e4825cb.jpeg16CAAA77-7B18-47F7-AF0A-397C3638F7BF.thumb.jpeg.8d0e77ad8d4bd1ad99fba94ffff84883.jpeg6FD8C1FF-CF08-4F27-B20F-1D7898D0B3DF.thumb.jpeg.58a8fd23d9dfc7c5bf98c675e0d69022.jpegA3E2A82C-0B24-4D05-BED9-75ABE53E954F.thumb.jpeg.a6248261a4aacc21989a8292b7ec630c.jpeg6D600F8A-806C-41C5-8FA7-325BF112C059.thumb.jpeg.efe7daa5e7f8eeba8312a01a2898f302.jpeg63C67C86-3EE4-449D-85EA-23A4F1807AF3.thumb.jpeg.63f1a3ac87deaa8965b71153feca8799.jpegFED3D402-1574-4974-98E6-1C80F438FFDF.thumb.jpeg.37f7e7065effcd432ea4425f87105a69.jpeg0EB633D2-0B7C-4F54-936F-7B31A6ACF5E4.thumb.jpeg.0490d3e84d515d64297fd61607e2c59b.jpegA1AD636D-557B-4272-A13C-965B01D6EE28.thumb.jpeg.0d283132430527e97638d328294cd7c5.jpegC861AF90-A6D6-4A00-86D7-7D76DAC68C40.thumb.jpeg.51927fc7ac8f9c2e9f646d7edd7f6af2.jpeg6246407C-4DF1-4A86-A9AD-5485FF746DBB.thumb.jpeg.c4227c1595d042838ed4bbd2ad315a56.jpegF4001E40-7780-42A4-BA5E-C3F564DA0705.thumb.jpeg.dadb42c217fd7e9dff45fe012fc0e25b.jpeg5708F2A9-B317-4FCC-A198-D8A380852832.thumb.jpeg.1fd264fd5a15ff18571ebd9b4249b4d8.jpegDA4A884E-2E43-405B-B263-7F23B9DBA687.thumb.jpeg.c5214bbc05ea231ba1c5721f9df8821b.jpeg

 

276BF4A3-FB0D-4A34-8B20-FF1BE77AEC65.jpeg

Edited by JTDesign
duplicate photos
  • Like 1
Link to post
Share on other sites

  • 4 weeks later...
  • 2 weeks later...
  • 4 weeks later...
Posted · Selling Ultimaker S5, Gently Used, Washington DC area $4,995

Hello, I am wondering if this printer is still available?

  • Link to post
    Share on other sites

    Posted · Selling Ultimaker S5, Gently Used, Washington DC area $4,995

    Yes. PM me if you are a serious buyer

  • Link to post
    Share on other sites

    Posted · Selling Ultimaker S5, Gently Used, Washington DC area $4,995

    @JTDesign - I sent you a message with my phone number and email. Please call me ASAP.

     

    Thanks,

     

    Tim

  • Link to post
    Share on other sites

    Posted · Selling Ultimaker S5, Gently Used, Washington DC area $4,995

    Is this printer still available?

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
      • Ultimaker Cura 5.6 stable released
        Cura now supports Method series printers!
         
        A year after the merger of Ultimaker and MakerBotQQ, we have unlocked the ability for users of our Method series printers to slice files using UltiMaker Cura. As of this release, users can find profiles for our Method and Method XL printers, as well as material profiles for ABS-R, ABS-CF, and RapidRinse. Meaning it’s now possible to use either Cura or the existing cloud-slicing software CloudPrint when printing with these printers or materials
        • 48 replies
    ×
    ×
    • Create New...