Jump to content

3d model on cura wont print with proper temp settings.


johnboyman

Recommended Posts

Posted · 3d model on cura wont print with proper temp settings.

Hello. I have a mingda d2 printer and I am using cura 4.8. My mingda d2 has a default temp for the nozzle at 180 I want to keep it that way but every time I go to print it will reset the temp to 200. So I customized my settings I attached an image of what my settings look like. Hope someone knows whats going on.

Untitled3434343434.png

  • Link to post
    Share on other sites

    Posted · 3d model on cura wont print with proper temp settings.

    The print temperature is in the material profile, so take a look there and change the temp you need for the material you use.

  • Link to post
    Share on other sites

    Posted · 3d model on cura wont print with proper temp settings.

    You cannot modify the generic profile that come with Cura, but just click on Duplicate and then you should be able to change the temperature.

  • Link to post
    Share on other sites

    Posted · 3d model on cura wont print with proper temp settings.

    Untitled5656.thumb.png.89128ef11b3342275a1a2148b9382193.png.7e53477711ec9ea27f53b589791ba86e.png

  • Link to post
    Share on other sites

    Posted · 3d model on cura wont print with proper temp settings.

    Thanks that totally worked. By the way if anyone else does this click activate I am pretty sure It did not set it right away.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...