3DXTECG Carbon Fiber PA12

[kevinmoore1337 4]

Every time a print finishes it gets stuck in the hot end and I have to do the stuck procedure. How can I stop this?

[SandervG 1,521]

Hi Kevin, 

Do you mean this material by chance? https://marketplace.ultimaker.com/app/cura/materials/3DXTECH/3DXTECH_CF_PA6_2019

 

If so, or if you mean a different material that is not listed in our marketplace, it most likely gets stuck because the material profile is not optimized for the material station. (I am assuming you use it in combination with a material station since you have listed on your profile that you have an Ultimaker S5 Pro Bundle). 

 

 

I will check if an update is on its way, and otherwise I'll ask if 3DXTECH is considering of updating/adding the profile. 

 

I see we have 2 other PA carbon fiber materials in the marketplace of which the profile has been made compatible for the material station. F3 PA-CF Pro from Fibertree and Luvocom 3F PAHT CF 9742 BK from Lehvoss. Since you will be working with a different profile I don't know how it will impact your print quality, but it might help with the material getting stuck.