Jump to content

CURA won't "PRINT" my STL File (attached) - Why Not?


MarkOrtega

Recommended Posts

Posted · CURA won't "PRINT" my STL File (attached) - Why Not?

Slices fine for me.  Maybe you should post your project file - that will contain your printer settings, STL, profile, overrides, etc.

 

Do "file" "save project..." and post that here.

234223165_Screenshotfrom2021-03-2919-41-51.thumb.png.8e585011160ddfb37ded835c48a0f649.png

  • Link to post
    Share on other sites

    Posted · CURA won't "PRINT" my STL File (attached) - Why Not?

    In Cura, I went to File.  The only save selections were:

    "Save Profile" or "Save Model".

    I did both and tried to drag them here, but files with those

    extensions aren't accepted.

     

  • Link to post
    Share on other sites

    Posted · CURA won't "PRINT" my STL File (attached) - Why Not?

    I have selected machine um2go so it will only print on a UM2 printer.

     

    What version of cura do you have?

     

     

     

  • Link to post
    Share on other sites

    Posted · CURA won't "PRINT" my STL File (attached) - Why Not?

    I'm guessing you have cura 14.X or 13.X (from 2014 or 2013 respectively).  The latest version is 4.8 which is what I slice your model on.

  • Link to post
    Share on other sites

    Posted · CURA won't "PRINT" my STL File (attached) - Why Not?

    Hello gr5.  I loaded the next version of the Cura software and my model sliced immediately-

    so I'm all good now.  I really appreciate your comments and your help.  Thanks, Mark

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...