Infill problems

[ben8g 0]

I am slicing a model and despite going through the settings, the preview doesn't show any infill. I've tried adjusting the colour scheme, wall thickness and infill settings which hasn't worked for me. Is there a setting unknown to me that switches infill on and off?

[IRobertI 521]

Without a screenshot and/or the STL (or even better, the project file) it's almost impossible to answer that question I'm afraid.

[ben8g 0]

10 hours ago, IRobertI said:

Without a screenshot and/or the STL (or even better, the project file) it's almost impossible to answer that question I'm afraid.

Hi Thanks for getting back to me. Thin file I have attatched a simple square with the same problem. Let me know if its in the right format.

LSC10_LinearSqua.gcode

Edited July 10, 2021 by ben8g

[ben8g 0]

LSC10_LinearSqua.gcode

[IRobertI 521]

Thank you for the file, however, what you have posted is the gcode-file which is the last stage of the process. Please attach an STL-file or preferably a project file. To save a project, load the STL you're trying to print, make adjustments to settings and then choose File -> Save Project. That file will include both the STL as well as all the settings you've made, that way we can check what might be wrong.

[ben8g 0]

LSC10_LinearQ.3mf

 

How about this?

Edited July 10, 2021 by ben8g

[IRobertI 521]

You have checked "Spiralize Outer Contour", that's why it's behaving the way it is. Uncheck that and things should go back to normal 🙂

[ben8g 0]

Thanks so much I really appreciate that!