Jump to content

Infill problems


ben8g

Recommended Posts

Posted · Infill problems

I am slicing a model and despite going through the settings, the preview doesn't show any infill. I've tried adjusting the colour scheme, wall thickness and infill settings which hasn't worked for me. Is there a setting unknown to me that switches infill on and off?

  • Link to post
    Share on other sites

    Posted (edited) · Infill problems
    10 hours ago, IRobertI said:

    Without a screenshot and/or the STL (or even better, the project file) it's almost impossible to answer that question I'm afraid.

    Hi Thanks for getting back to me. Thin file I have attatched a simple square with the same problem. Let me know if its in the right format.

    LSC10_LinearSqua.gcode

    Edited by ben8g
  • Link to post
    Share on other sites

    Posted · Infill problems

    Thank you for the file, however, what you have posted is the gcode-file which is the last stage of the process. Please attach an STL-file or preferably a project file. To save a project, load the STL you're trying to print, make adjustments to settings and then choose File -> Save Project. That file will include both the STL as well as all the settings you've made, that way we can check what might be wrong.

  • Link to post
    Share on other sites

    Posted (edited) · Infill problems

    LSC10_LinearQ.3mf

     

    How about this?

    Edited by ben8g
  • Link to post
    Share on other sites

    Posted · Infill problems

    You have checked "Spiralize Outer Contour", that's why it's behaving the way it is. Uncheck that and things should go back to normal 🙂

    • Like 1
    Link to post
    Share on other sites

    Posted · Infill problems

    Thanks so much I really appreciate that!

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...