Infill protruding out of the part

[daniyalshoukat 0]

Hi Everyone,

 

I'm using a Creality Ender 5 Pro to print a rectangular part with ABS. 

The print settings I'm using in Cura are: 

Layer Height=0.2mm

Wall Line count=0

Top/Bottom layers =1

Infill Density=100%

Infill pattern =lines

Connect Infill Lines= Enabled

Print Temperature=220 C

Bed Temperature = 105 C

Print Speed=30mm/s

 

The part looks pretty good after its printed. However, I'm noticing that the infill is protruding out the sample. Please see the markup in the picture attached.

I have noticed if I print with walls, I don't see the problem, though I need to print my samples without walls.

I know I can manually change the gcode too to change the extruder movement but I don't know what to change in the code.

 

Can someone please help me out? I don't know which setting in Cura can resolve this issue.

 

Thankyou very much!

[nallath 1,123]

You're changing a lot of settings to values that you shouldn't use.

 

Have you tried printing the object without changing settings? At the very least set the wall line count to 2 and top/bottom layers to 5.

[daniyalshoukat 0]

I have tried increasing the wall line count and the problem seems to be resolved.

 

However, I don't want to print the walls and was wondering if there's an infill setting in Cura that could help resolve the issue as well.

[nallath 1,123]

Why wouldn't you want to print the walls?

[daniyalshoukat 0]

Its just a requirement of my research.

[nallath 1,123]

You could play with the infill overlap setting. By default it's not on zero to ensure that the walls and the infill stick together well.