HELP I need a Creality CR-10 V3 profile

[MopishFungus 0]

I need Creality CR-10 V3 profile and I cant find one anywhere what so ever. Could someone give me a link to one or upload their own to assist me in this. Please and thank you. Everyone reading this I hope you have a great day!

[SandervG 1,521]

Hi, these resources might be helpful to you! Good luck! 

[GregValiant 1,316]

Or you can add your printer as a Creality CR-10 "base" model.  On the right side of the screen you can change the name to whatever you want.

After adding the printer go to Manage Printers / Machine Settings and double check the size of the build plate.  It might be listed as slightly smaller in the X and Y than what you physically measure but that is because Creality leaves a safety margin around the periphery to insure prints are actually on the bed and never hang off the edge.

As far as Cura is concerned, all the CR-10 definitions are the same except for the build plate size.  I know there are some other variations but the gcode generated for all of them is the same.

I would think that Creality will provide a definition file for the V3 for the next release of Cura.