Help, what have I done

[ToonTownGuy 0]

Ok, I'm very new to 3D printing and Cura v4.10. I keep seeing a 'print settings' window in all the help vids I look at.. but that is not showing on my app. how do I get that to display and what (if anything) did I do to make it go away???

 

I attached 2 pics, one of what I see and one from a help vid showing that print settings window that I can't see.

[GregValiant 1,322]

It isn't loaded at installation.  Go to MarketPlace (upper right) and then Plugins / Community Plugins and scroll down to Printer Settings and install it.

Mostly they are guides for other settings in Cura.  For example, if you have your max Z feedrate at 10 in Printer Settings and try to set the Zhop speed to 20 you will get a warning and Cura won't slice.

I think the only thing it's required for are multi extruders that share the heater and nozzle (like the 2-in-1-out hot ends).

[ToonTownGuy 0]

Well I have that installed and STILL can't see it.  When I look at installed plugins it does say something about changes need to be made in the sidebar over-ride???

[ahoeben 1,965]

Click on or near the small pencil in the bar along the top of the window.

[ahoeben 1,965]

Generally speaking, all the sections on that top bar "do something" when clicked.