Jump to content
Sign in to follow this  
nudelmannrichter

Someone (in Germany) who could do a UM2 print for me?

Recommended Posts

Posted · Someone (in Germany) who could do a UM2 print for me?

Hi guys,

I am looking for someone (easiest if in Germany but don't mind foreign prints of course) who could make a test print for me.

I have a ready stl file that is printable as I know cause I tested it on other printers.

The goal is to do it at finest layer height possible what should be 20 micron.

I would prefer ABS but as I know that mostly PLA is used I would give this a try.

The colour does not matter. Infill strategy is on you.

The size is about 65mm in diameter an 30 mm in hight.

I will be happy to pay for this.

Please drop me line so I can send you the file.

thank you from Germany

nudel

 

Share this post


Link to post
Share on other sites
Posted · Someone (in Germany) who could do a UM2 print for me?

Hi nudelmannrichter

Hast Du schon jemanden gefunden der einen Testdruck für Dich macht?

Wenn nein, dann schick mir eine PM und ich werde es für Dich erledigen.

Markus

Have you ever found someone who makes a test print for you?

If not, then send me a PM and I'll do it for you.

Markus

Share this post


Link to post
Share on other sites
Posted · Someone (in Germany) who could do a UM2 print for me?

same here - happy to print (Ultimaker located in Berlin) just send me a PM :)

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Our picks

    • Survey: Understanding your workflow
      Interact with future concepts and aim to collect your feedback and opinion. In particular, if this would/could be a welcome addition to your 3D printing workflow. Interested?
      • 0 replies
    • Coronavirus: Let's do our part
      Through this post I would like to further explain what we are doing, and what you could be doing. 
      Our efforts consist of 2 layers. First; connect medical institutions and hospitals to (local) 3D Printing hubs to help them print parts of which a 3D model already exists. And second, contribute to design the necessary part and then have it printed via a (local) 3D printing hub. Experts are available from within Ultimaker and from within our network of 3D printing experts.
        • Like
      • 46 replies
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!