Okay, here is the full 3mf file.
GregValiant 1,342
Yep. Those parts come to a knife edge and knife edges can't be printed.
Cura (or any slicer) won't acknowledge areas of a model when the slice is narrower than your line width setting. You can try dropping the line width to .35, or you can drop the nozzle size to a 0.2. In either case you will get closer to the tip but you can't ever get there as there will always be an area that is narrower than your line width.
Seems to have helped a bit, thanks for the help.
try the new Cura 5.0 beta, it is especially improved to print finer details
-
1
Recommended Posts
GregValiant 1,342
@Pureminer - With the model loaded and Cura ready to slice, use the "File | Save Project" command and then post that 3mf file here. I have a feeling the model gets too narrow for your nozzle/line width. A project file will show what's going on.
Link to post
Share on other sites