Jump to content

S5 pro bundle with 7.03 will not update to 7.04

kayakbabe

By kayakbabe
in Firmware

 Share

Recommended Posts

kayakbabe

kayakbabe 12

Posted
Posted · S5 pro bundle with 7.03 will not update to 7.04

I normally use the S5 to update itself. 

I have the newer model with the U on the side.

My previous updates have all been through the S5. I've never done one via USB, so I assume that the S5 would have the correct version of the firmware for 7.03.

Logging into Cura today, Cura told me there was a firmware update for the S5. 

On the S5, I used the maintenance menu to get the update. I pressed to install, then an error saying the version I had on my machine was unexpected. 

 

So.. what to do? I see the update just was released yesterday at 10am. Do I need to wait a period of time for the server to fully get the correct information so that my S5 can be updated?

 

    • Link to post
    Share on other sites
    Smithy

    Smithy 1,144

    Posted
    Posted · S5 pro bundle with 7.03 will not update to 7.04

    Reboot your S5 and try it again. I am not sure if it helps, but a clean reboot is always a good start before a firmware upgrade.

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Followers 1
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...