Hey @fabianholzer_listgc,
I doublechecked 316L does not come with our Metal Pack, and Cura does not support dual extrusion with this material.
If you disable your second extruder, your printer will just print a skirt, no shrinkage plate.
You'll have to print your shrinkage plate seperately and include it in your box to be attached by the Debinding and Sintering staff.
UMS5_shrinkage plate - squared template with round edges.3mf
This picture is part of the elearning course about Metal Printing.
Hopefully this link works for you:
https://academy.ultimaker.com/learn/course/285/play/876/designing-for-metal-fff
Good luck with your metal print 💪
I'm super curious how it turns out, the boat looks so cute.
Recommended Posts
MariMakes 204
Hey @fabianholzer_listgc,
Welcome to the Ultimaker Community 🚀
So cool that you are trying to print with metal!
If I'm honest I don't know the differences between slicing for 316L and 17-4PH.
I'll have to ask around 💪
Do you have the support material, and core that you need for this raft or do you intent to print single extrusion?
https://forward-am.com/material-portfolio/ultrafuse-filaments-for-fused-filaments-fabrication-fff/metal-filaments/ultrafuse-support-layer/
Link to post
Share on other sites