Glass or Carbon Filled

[flyntm 2]

I have an S5 and I need to discover the strongest filament I can get.  I'm assuming that is either a glass filled or carbon fiber nylon. There are so many choices. What are the best brands of these materials and do I need a special support material? It would be nice if these were supported in the Ultimaker Market Place but that's not a requirement.  Or , if there's something else I should try, let me know.  I'l; be using a CC 0.6mm Print core.

 

Thanks

[MariMakes 199]

Hey @flyntm,

 

I asked our Material Experts and they reccommended this article they wrote on the topic:
https://ultimaker.com/learn/glass-vs-carbon-fiber-composite-3d-printing-materials

I think it contains the answer you need based on the requirements that you have 😉


Good luck in finding the material you need 😃

[dsp 18]

check this out for a strong print 

 

[flyntm 2]

I saw this, but I couldn't seem to find a place to buy the material they used.

 

[flyntm 2]

Mari,

 

Great article.  But, I'm having trouble figuring out where to buy these filaments.

 

Thanks

 

[MariMakes 199]

Hey @flyntm,

 

If you find the material that you want on the Ultimaker Marketplace you can find a link with Buy Material Spools:




You can try it out here:
https://marketplace.ultimaker.com/app/cura/materials/Covestro/Addigy_F1030CF10