Jump to content

Wall issues


Recommended Posts

Posted · Wall issues

I am looking for HELP! New to 3D printing- got my ender 3 pro for xmas. I got the bed leveled very good . Good filament- sunlu,techbear,overature. I have a lot of stl files i have collected in anticapation of this adventure- I am trying to make clay cutters and on every one (from different sellers) The walls of the cutter have separation- enough on some that you can put a piece of paper in between them. The Picture shows my problem on a heart cutter . I think my problem is something i need to adjust in cura- can anyone help me.

clay cutter 1.jpeg

  • Link to post
    Share on other sites

    Posted · Wall issues

    This is just simple underextrusion.  Maybe only 30%?  It's hard to say.  Meaning it's putting out 70% of what it should be putting out.  It could be so many issues - pretty much all of them are hardware related.  But maybe read this thread:

    That person has the same problem but much worse.  Maybe you can do the same calibration procedure and hopefully that will fix your mild underextrusion.


  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
          • Like
        • 16 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
    • Create New...