20 hours ago, gr5 said:It sounds like you want to keep the skin but remove "infill". You can do this with options in cura (disable infill). You can even just disable the infill for regions of your print only. But you can only modify the gcode file with a text editor but if you have the model (e.g. an STL file) then you can just change some cura settings.
Do you have access to the original model? Or only the gcode?
I think that's kind of what I'm trying to do, more like remove the infill and substitute it with another infill, how do I disable it for some specific regions only?
Recommended Posts
PizzaTijd 13
I'm unsure of what you're trying to do, but the options you listed do the following:
Skirt: a line placed around your print, practically functioning as a priming method to make sure your material is ready for your print when the skirt is done - a skirt is not attached to your print. Alternative to this is a brim, where it *is* connected to your print, and may help prevent warping and aid overall build plate adhesion.
Outer wall is precisely that - the part of the wall that is on the outside part of your print.
Inner wall is also precisely what it states, they're the material that are part of the wall but are on the inside of the print.
What exactly do you define as outer infill?
Edited by PizzaTijdLink to post
Share on other sites
gr5 2,224
It sounds like you want to keep the skin but remove "infill". You can do this with options in cura (disable infill). You can even just disable the infill for regions of your print only. But you can only modify the gcode file with a text editor but if you have the model (e.g. an STL file) then you can just change some cura settings.
Do you have access to the original model? Or only the gcode?
Link to post
Share on other sites
Gineisvasconcelos 0
It's more as if I want to leave some "empty" spaces on my part, I have a original CAD drawing that I've sliced thought CURA and got a G-Code out of it, but I want to modify the internal part so I have some blanks on it, for that I creater a smaller part on CAD, sliced through CURA and got another G-Code, Now I want to move the part of the G-Code that is responsible for the internal mapping to the other G-Code program.
Makes sense?
Link to post
Share on other sites