Jump to content

Who's filament do you use?


andrew-white

Recommended Posts

Posted · Who's filament do you use?

I don't know all the different brands that are available or I would have done a poll out of curiosity. If like me you have purchased than 1 brand of filament. Is there one brand in particular that you gravitate towards? Or do you base it on the item to be printed and the filament type required.

  • Link to post
    Share on other sites

    Posted · Who's filament do you use?

    Colorfabb PLA is actually not really "top". XT is a whole other story, but XT is not PLA.

    Faberdashery PLA is definetly the best stuff if you need the very best colors.

    /edit:

    Note, that's just my personal opinion!

     

  • Link to post
    Share on other sites

    Posted · Who's filament do you use?

    With a name like Andrew White and your wording I assume you're in the UK? If yes, see my review of Spectrum Filaments. I've had good success with them, plus they're one of the few that are clear about the dimensions of the filament, i.e. 2.85mm and not 3mm. I hate to intentionally buy filament that even claims to be the wrong size, even when I know that in practise that isn't the case.

    Also it should be noted that Faberdashery I think doesn't come on a reel. I prefer a reel as I feel that buying short lengths results in a lot of waste.

     

  • Link to post
    Share on other sites

    Posted · Who's filament do you use?

    That`s correct Faberdashery does not come reeled. It`s my go-to filament, quality is superb and the range of colours is excellent. Not the cheapest though!

     

  • Link to post
    Share on other sites

    Posted · Who's filament do you use?

    I've been using a couple different ebayers who are close to me in the U.S. It' s cheap, prints great, and so far I haven't had any deformations or complaints. It's about $25 per roll (single) or $20 per roll if I buy 10 at once. plenty of colors to choose from.

     

  • Link to post
    Share on other sites

    Posted · Who's filament do you use?

    @andrew white - what country are you in and also please update your profile settings to indicate that country in your location field. The answer to your question depends on what country you are in as there are dozens (hundreds?) of suppliers of PLA alone.

     

  • Link to post
    Share on other sites

    Posted · Who's filament do you use?

    @ gr5 Location updated, i'm in Northern Ireland. I currently have mostly Faberdashery & some Colourfabb was just wondering if there was any other suppliers out there worth considering.

    @DonMilne the wording my not be great as i have dyslexia, I will have a look at your spectrum review. Quick check of the name shows them as being about 20 mile up the road from me in Newry so thats handy.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...