Cura 14.06 Fix Horrible Type A Issue

[antiklesys 3]

Fix Horrible Type A creates an issue.

It closes several holes which are by design while printing the STL "SpoolHub-x1.stl" of this design: www.thingiverse.com/thing:10219

Does anyone else face this issue? It can be noticed by just switcing the view to "layers" and scrolling up and down with the slider.

 

[nallath 1,123]

Yes; Thats the reason why these options can be turned off. In some cases they fix horrible models, in some cases they wreck them.

 

[gr5 2,192]

If the model is manifold (no holes in skin, no missing polygons, no polygons *inside* the model) and it has no unconnected polygons closer than .1mm apart and if all the normals are facing outward (STL files have polygons and each one has a normal to indicate which way is out and which way is in) then you don't want any of the "fix horrible" checkboxes checked.

Usually "type a" doesn't harm a manifold model but sometimes it fills in things that are meant to be hollow.