Polishing Bronzefill filament

[pm_dude 27]

What are the results with laybrick?

 

[peggyb 171]

These discs are doing a good job on the polishing of the metal filaments from Colorfabb: Habras discs. http://www.keystoneindustries.com/en/rotary/hatho_habras_discs.html

Different grids embedded in a polyamide brush, yellow-80, red-220, blue-400 grid. Perfect for irregular surface and hard to reach parts. There is almost no heat generated, but keep it moving...

Finish with a soft cloth with Brasso or polishing paste.

These examples, bonze and brass, were 5 minutes of work

 

 

[personal-drones 44]

Great job peggy, will look into these disks.

 

These discs are doing a good job on the polishing of the metal filaments from Colorfabb: Habras discs. http://www.keystoneindustries.com/en/rotary/hatho_habras_discs.html

Different grids embedded in a polyamide brush, yellow-80, red-220, blue-400 grid. Perfect for irregular surface and hard to reach parts. There is almost no heat generated, but keep it moving...

Finish with a soft cloth with Brasso or polishing paste.

These examples, bonze and brass, were 5 minutes of work

 

 

 

 

[yellowshark 153]

If you wanted the piece to conduct electricity you could try conductive ink and electro plating http://www.goldn.co.uk/category/non-conductive-surfaces/