Dimension of Ultimaker 2 front door?

[lance-greene 7]

Hey just wondering the dimensions of the Ultimaker 2 front opening so I can buy some acrilic to make a door for it.

the door wont have to round edge at the bottom so I just need highest to lowest dimension. thanks.

 

[ultiarjan 1,223]

not at home atm, but here's the STEP file, the complete UM2 drawing.

use your CAD software or download Design Spark Mechanical to open it.

https://github.com/Ultimaker/Ultimaker2

 

[pm_dude 27]

Ho!! Nice. I didn't know you could load step files in DSM. I'm such a CAD noob...

 

[ultiarjan 1,223]

also have a look here... the trick to unlock step files in DSM;

http://umforum.ultimaker.com/index.php?/topic/2772-spaceclaim/?p=53816

 

[pm_dude 27]

Hi Lance,

Here is my version:

https://www.youmagine.com/designs/um2-plexi-holder

Its using a 11" X 12" sheet. 3mm thick

 

[tinydancer 0]

Hi Lance,

Here is my version:

https://www.youmagine.com/designs/um2-plexi-holder

Its using a 11" X 12" sheet. 3mm thick

Just wondering dude, but did you put the door on for more stable temps when printing with ABS?

 

[pm_dude 27]

I dont print ABS but it does help in XT and Nylon prints. Plus it reduce the noise a little.

 

[pm_dude 27]

Ho and I changed to this version 2 hours later. The first one was too massive.

https://www.youmagine.com/designs/um2-plexi-hook

 

[lance-greene 7]

awesome thanks for the size, I found an 11 x 14 inch sheet for $14 at home depot

 

[tinydancer 0]

Printed out your clips as I want to start printing nylon for a project I have planned. Thanks dude!