Great investigating work! I am sitting here, trapped at work, living vicariously through your experiment
Ok. So setting Cura to 232mm width means the center is 1mm to the right. How is that a bad thing? When my piece printed, I believe it looked like I still had maybe 1cm of glass space to the right, so there is enough flooring for the plastic to adhere to. And my gantry never hit the side wall (granted, I had to bend the metal fan housing a tad). Would I really have to tweak/adjust the G1/G92 hacks?
Recommended Posts
randyinla 14
I love that autocorrect, "print head will heat an endblock" (assume you meant meet or hit?)
I understand how the end blocks / switches work and how playing with the switch position can yield a teensy bit of room (or take it away if misaligned). Even if I were to do that (and I probably won't) I would still have to update Cura to 231mm or 232mm.
This dancing around a few mm's in Cura to print out a 225mm wide piece just reminds me of an underlying angst; that I would LOVE to expand my U2 in both the X & Y by maybe 4" each .
Link to post
Share on other sites