Jump to content
Ultimaker Community of 3D Printing Experts

Ultimaker 2 - What are your favorite (printable) upgrades? List included.


Recommended Posts

Posted · Ultimaker 2 - What are your favorite (printable) upgrades? List included.

I know we have the pinned post for the feeder system improvements, which was one of the first things I printed when I got my UM2, but there are a lot of other great upgrades to the UM2 that I didn't find out about until I started having issues and doing a lot of searching. So I figured I'd post what I think are some of the better upgrades for the UM2 that everyone could/should have.

I'll try to link to the relevant threads if they exist (like the feeder thread).

There are even more great upgrades (not printable however) like the work being done on the http://umforum.ultimaker.com/index.php?/topic/7689-custom-heater-block-to-fit-e3d-nozzle-on-ultimaker-2/, http://umforum.ultimaker.com/index.php?/topic/7024-teflon-spacer-replacement, and http://umforum.ultimaker.com/index.php?/topic/6987-flexible-shaft-the-best-of-both-worlds/.

Feeder: (http://umforum.ultimaker.com/index.php?/topic/4393-ultimaker2-feeder-system-improvements-and-ideas/) (http://umforum.ultimaker.com/index.php?/topic/8784-roberts-feeder-feedback/) (http://umforum.ultimaker.com/index.php?/topic/7916-best-improved-extruder-design/)

https://www.youmagine.com/designs/alternative-um2-feeder-version-two

https://www.youmagine.com/designs/yet-another-ultimaker-2-feeder

https://www.youmagine.com/designs/extruder-um2-version-2

https://www.youmagine.com/designs/um2feeder-v3-1-1

https://0x7d.com/2014/07/improved-ultimaker-2-material-extruder/

https://www.youmagine.com/designs/wire-retainer-clip

Filament Spool/Path:

Holders:

https://www.youmagine.com/designs/low-friction-um2-spoolholder

https://www.youmagine.com/designs/universal-stand-alone-filament-spool-holder-fully-3d-printable

https://www.youmagine.com/designs/self-retaining-low-friction-spool-holder-for-ultimaker-2

Guides:

https://www.youmagine.com/designs/um2-bearing-filament-guide

https://www.youmagine.com/designs/um2-filament-guide

https://www.youmagine.com/designs/spreading-ring-for-reverse-bend-filament-feed-for-ultimaker-2 - (http://umforum.ultimaker.com/index.php?/topic/5454-ultimaker2-reduce-filament-friction-in-the-bowden-tube/)

Filters:

https://www.youmagine.com/designs/dust-filter

http://www.thingiverse.com/thing:153807

Fans: (http://umforum.ultimaker.com/index.php?/topic/8003-fan-base-improvement/) (http://umforum.ultimaker.com/index.php?/topic/9706-lets-talk-about-12-screws/)

https://www.youmagine.com/designs/fan-base-um2

https://www.youmagine.com/designs/fanduct-another-idea

Enclosures/Doors (For printing ABS):

https://www.youmagine.com/designs/um2-minimalist-front-panel

https://www.youmagine.com/designs/door-for-ultimaker-2

https://www.youmagine.com/designs/closed-chamber-green-house-um2

Customization:

https://www.youmagine.com/designs/ultimaker2-rail-system-u2rs

https://www.youmagine.com/designs/ultimaker2-cable-chain

https://www.youmagine.com/designs/custom-engine-covers-um-2

https://www.youmagine.com/designs/um-original-um2-soft-feet

https://www.youmagine.com/designs/ultimaker-tool-kit

https://www.youmagine.com/designs/ultimaker-2-bed-leveling-screw-cap-v1-1

http://www.thingiverse.com/thing:612929

http://www.thingiverse.com/thing:471526

https://www.youmagine.com/designs/dovetailed-mounting-system

 

  • Link to post
    Share on other sites
    • 1 month later...
    Posted · Ultimaker 2 - What are your favorite (printable) upgrades? List included.

    Hi CCW, ive designed a dovetail mounting system for various spools, loose filament and other items, details on YouMagine.

    Don't like blowing my own trumpet but if others want to have a look and comment on its good or bad points

  • Link to post
    Share on other sites
    Posted · Ultimaker 2 - What are your favorite (printable) upgrades? List included.

    @CCW: Ehm you forgot my Spool and Feeder holder

    https://www.youmagine.com/designs/spool-and-feederholder

     

  • Link to post
    Share on other sites

    Archived

    This topic is now archived and is closed to further replies.

    ×
    ×
    • Create New...