-
Posts
148 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Everything posted by RaphaelOst
-
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Der Drucker war ein Vorführer, er hat also schon einige Druckstunden. Ich habe noch keine Ersatzdüsen gekauft, habe aber Ultimaker Cleaning Filament. Der Druckkopf lässt sich ohne festhalten problemlos herumschieben. Riemen werde ich morgen genau mit einem anderen Drucker vergleichen, wenn dieser mit seinem Druckauftrag fertig ist. Ich muss noch schnell die Teile von den Druckplatten lösen und sende dann ein richtig schön großes Foto. -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Ich habe ein 2*2cm großes Quadrat mit Loch in der Mitte gedruckt. Das Ergebnis ist bei beiden Drucken 0.4 und 0.44 mm ist gleich. Die Modelle sind genau 2 cm groß. Ich drucke gleich eines mit 110%. Mir ist auch noch aufgefallen, dass dies bei dünneren Teilen stärker ausgeprägt ist. (3mm zu 20mm) -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Hallo, es hat leider nicht geholfen. Schon bei 0.44 mm war keine Verbesserung zu sehen. -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Danke, werde ich gleich probieren und Ihnen dann über das Ergebnis berichten. -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Ich habe eine 0.4er Düse. Ich habe verschiedene Liniendicken probiert. 0.35 und 0.4 -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Vielen Dank für den Tipp. Die optimalen Temperaturen habe ich am UM3 getestet und diese dann einfach für den UM2E+ und den UMS5 verwendet. Bei der Materialextrusion habe ich keine Probleme, bei den Drucken mit gerader Oberfläche habe ich ein Loch zwischen den Wandlinien und den Fülllinien. Dies konnte ich auch nicht mit den Einstellungen beheben (nur beim UM2E+ tritt dieses Problem auf). -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Hallo, ich benutze Extrudr PLA, Temperatur Druckbett ist 60 Grad, der Extruder hat 205 Grad. Die Druckeinstellungen sind die gleichen wie beim UM3. Bei diesem ist das Ergebnis top. Das Druckbett habe ich sauber manuell ausnivelliert. -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Ich habe das Teil schon um 90 Grad gedreht, das hat am Ergebnis nichts verändert. -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Hallo, vielen Dank für die Antwort. Ich werde es gleich mit Ihren Verbesserungsvorschlägen probieren. Wieso ist in Cura die Standardlinienbreite auf 0.35 wenn 0.4 eigentlich besser ist? Wünsche Ihnen frohe Weihnachten. VG -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Guten Morgen, anbei die Cura Projektdatei. Nochmals vielen Dank für Ihre Hilfe UM2E_Standard Smiley Einkaufswagenchip sofort abziehbar.3mf -
Druckergebnis Ultimaker 2E+ schlechter als bei UM3 oder S5
RaphaelOst replied to RaphaelOst's topic in Deutsch
Hallo, vielen Dank für Ihre schnelle Antwort. Ich habe gleich einen Testdruck gemacht. Leider hat es nicht geholfen. Haben Sie noch andere Vermutungen woran das liegen könnte? -
Hallo, ich habe mir vor ein paar Tagen einen Ultimaker 2 Extended+ gekauft. Schon nach den ersten Testdrucks fiel auf, dass Oberfläche Löcher aufweist. Diese sind immer beim Übergang der Wandlinien zur Innenfläche. Anschließend habe ich die Datei mit dem Ultimaker 3 und dem Ultimaker S5 ausgedruckt, die Testteile waren makellos. Ich habe die Einstellung "Außenhaut überlappen" erhöht, dies hat das Problem aber nicht verbessert. Ebenfalls habe ich die kompletten Einstellungen des UM3 auf den UM2E+ übertragen. Dies hat auch nicht geholfen. Kann mir jemand weiterhelfen?(Anbei ein Bild, Rechts das Teil des UM2E+ und rechts des UM3) Vielen Dank im Voraus Mit freundlichen Grüßen Raphael Ostheimer
-
Vielen Dank für eure Tipps.
-
Hallo, ich meinte natürlich den Bauraum mechanisch zu vergrößern. Ich habe auch nicht vor meinen UMS5 zu zerlegen, sondern alle Teile nochmal nachzukaufen und aus diesen einen Großraumdrucker mit ca. 1m x 1m x 1m Bauraum zu bauen. Die Software des Ultimakers will ich auch hier wieder verwenden, jedoch müssen daran einige Veränderungen vorgenommen werden, dass diese dann funktioniert. LG Raphael
-
Hallo Herr Smithy, vielen Dank für Ihre schnelle Antwort. Sie haben mir sehr weitergeholfen. Wünsche Ihnen noch ein schönes Wochenende. LG Raphael
-
Hallo, ich würde gerne den Bauraum eines Ultimaker S5 vergrößern. Ist die Bauraumgröße in der Firmware hinterlegt? Oder kann ich diese einfach in Cura ändern? Wie komme ich auf die Firmware des Druckers? Vielen Dank im Vorraus Mit freundlichen Grüßen Raphael
-
Hi, I have got a problem with cura. I print 8 pieces mask holder with the same file on the same plate. 3 pieces are ok, and the others are demulated. I designed them with Rhino 6. Can anybody help me? Thanks in advance Best regards Raphael
-
Sorry for my late answer, I was in vacation. I cleaned the nozzle with hot and cold pulls and I tried to change the Filament. The results are much better than before. I will try all tips you gave me, thank you so much.
-
That is imortant, I will note it down. The layer high was 0.1mm. The print with 20mm/s is much better than them before. -> so it is 0,8mm3/s There is still a bit of underextrusion, could it help to clean the printcore? I made a screenshot from the speed settings, which I took for the print. The infill was not the right speed.
-
Hi gr5, thank you for your reply. I found out that the profile of the infill has allways the same problem. Could that be underextrusion? I had activated "print thin walls". The wholes weren't shown in the slicer. In Cura it looks perfect. Now, it is printing it with 20 mm/s. I can say if it helped when the print has finished. I am printing with the AA04 Print Core, but I also have the AA0.25 or the AA08 available. I noticed that the problem is only when the wall is smaller than the housing. I'll be in touch, Once again many thanks, Raphael
-
Hi gr5, thank you for your reply. I had activated "print thin walls". The wholes weren't shown in the slicer. In Cura it looks perfect. Now, it is printing it with 20 mm/s. I can say if it helped when the print has finished. I am printing with the AA04 Print Core, but I also have the AA0.25 or the AA08 available. I noticed that the problem is only when the wall is smaller than the housing. I'll be in touch, Once again many thanks, Raphael
-
Hi, I have got problems with my Ultimaker 3. When I print thin things like cookie cutters, it is not smooth. There are little points and also very little wholes in the object. Only thin prints up to about 1 cm are affected. On bigger things is everything ok. I have read for hours and I tried to solve the problem. The Material is PLA. I tried different temperatures and infills, because I often read that I should reduce the temperature(but that doesn't help). All other settings were from the standard profile of Ultimaker PLA. Can you help me with that problem? Thank you in advance Best regards Raphael Ostheimer