Ch3vr0n

https://github.com/Ultimaker/Cura/issues/12226

known issue

well this topic is 8 years old, nothing works forever.

i'd start by at least updating to 4.13.1 and possibly even 5.0, you're 2.5 years out of date

Yup, probably a false positive @Lze Go to the protection > Antivirus > Advanced and temporarily disable "bitdefender shield". Then reinstall (its easier than messing with the quarantined objects. Then open the GUI and go to Antivirus > Settings > Manage exceptions. Click add exception and under path set (assuming x64 windows) "c:\program files\ultimaker cura 5.0.0\ultimaker-cura.exe". Flip the 1st switch (antivirus) > and i enabled all 3 checkboxes, then flip the third one (advanced threat defense". Click OK. At least that should for the moment let it start up. I'll wait myself on using it, until there's more plugin support and this issue is fixed.

confirmed with bitdefender, can't even copy it over manually using an admin level command prompt. No doubt a false positive but still shouldn't be happening or preventing manual file copy. Only fix was booting into safe mode and manually moving the exe into the proper folder, and making an exclusion for both on-demand, on-access and general folder exclusion

option 1: wrong. Model is solid just fine. Text is on layer 1 in the middle of a model. Use a brim and cura adds a brim outside those text lines while in the middle of layer 1 option 2: wrong again. Text is filled in, but not seperated print time. Look "Fibo filament box" on thingiverse and you'll see exactly what i'm talking about none of your solutions fix anything

It probably does ask, but with limited choice. I'm guessing the first "dropdown" when you open is for the startcode as it asks if you want to update the printer or add a new one. But there's no way to select to KEEP the current one

Well i just tried and it's a 3mf file that had the embedded image so i'm pretty sure it saved with 4.13.1. So you're telling me, start/endcode settings that may have changed since the project was created get overridden and i have to redo them all? That shouldn't be happening. I don't mind the sidebar stuff getting overridden, that's the job. But start/end gcode shouldn't get replaced

I have a annoying issue since updating to 4.13.1 and its that cura is constantly resetting my start gcode for temperature values. My preferred config is as follows (slightly modified from default) However for some damn weird annoying reason cura keeps resetting the pre-levelling and final heating section temperatures to And to make it even more weird. When i change it, it's remembered for a few times closing and starting, and after a few times it's back to reset. I wanna know how to fix this without loosing my printer profile & custom quality& material profiles

Is this new engine (when finally released) going to allow prints that have text in the first layer, to be printed with a brim on the OUTSIDE of the model only? So text doesn't get filled in?

can't figure out how to make a PR, is an issue ok?

Point me to the correct github location and i'll make an issue / PR

So am i asking this in the wrong place? I don't think so, cause i grabbed Cura from the main ultimaker.com site. Is there any way this can get added to the UM Cura?

Not in 4.11 on my end

After trying PrusaSlicer for a while, i'm moving back to cura. I just prefer it over PS. But if there's one thing i loved while tinkering with prusaslicer is this awesome top/bottom patternt it has. It's called "Hilbert Curve". Looks like the image below. This is a mesmerizing thing to watch getting get laid down, and the final result is just as mesmerizing. Any chance this can get added? https://en.wikipedia.org/wiki/Hilbert_curve

And as i stated i didn't have that keyword there in 4.10, yet it's not being added. I've never had that line in there. Explain that. My startcode always has been using explicit M140/M190, yet 4.10 didn't add those redundant lines and 4.11 does. The only thing i changed manually between 4.10 and 4.11 (in light of levelling) was: to and to because i noticed z-offset differences between the bed pre-heat temp of 60° and 70° so i simply increased the hardset pre-heat temp from 60 to 70, and removed the bed temp line in the final heating section as it was no longer needed.

that cant be it because it's added a third time at line 89 in accordance with the specified startcode Attached are 2 gcodes. the FIBO one is sliced with 4.10 same startcode, those lines aren't there The upgrade one is sliced with 4.11. Same startcode yet one has it, the other one doesn't. CrealityMaxExtruderUpgrade-260_0.4N_0.2LH_0D3H49M.gcode FiBo_-_Base_-_Short_45mm_0.4N_0.2LH_1D1H13M.gcode

Below is my startcode Yet when slicing my startcode looks like There's a redudant M140, an M105 and an M190 where they shouldn't be. As is visbile in screenshot 1 (i maxed out the manage printers view so everything was visible, evidence of this is the lack of a scrollbar) those 3 startcodes DO NOT exist in my configured startcode. These lines cause additional delay as it waits for the bed to heat up first to full temp before starting to pre-heat the nozzle. I have no idea where this is coming from 4.11.zip

I did remove them that way, as at the time (until now) that was the only way i knew of removing them. I found the setting, used it, plugin said it removed 185 profiles from loading and sure enough only my custom created ones are loaded again. Just the way i like it. Thanks! Followup question to that end. This is what it currently looks like in the \materials folder Now i checked them out with notepad and they're xml files. As an experiment i tried editing the filename of such a custom one to the actual <label> but if i do that the profile is no longer loaded. Any reason for that? Am i missing something? Purely for easy recognition i'd love the filename to be the same.

4.3? That's a 2 year old release. Try 4.11 that was just recently released.

Not possible, due to the this issue, i havent been logged in in weeks. Cura restored them and they're default profiles. I checked the online marketplace after logging in, can't even find them. These are Cura default installed profiles and i want them gone. They're not in the materials profiles

in 4.10 i had cleaned up the C:\Users\Wim\AppData\Roaming\cura\4.10\materials to my liking to the point where Cura only showed the ones I used, and setup myself. Now after 4.11 all those (to me useless) material brands like "3DFuel, Best Filament, eMotionTech" are back and they're not in the \materials folder for 4.11. Can't seem to get rid of them either through the marketplace \ materials tab. Where are they stored, so i can get rid of them. I don't need or want them.

so what do i have to do to get this fixed?

Here's the prusa repaired one. https://drive.google.com/file/d/1TYvvdlfJzwtyAFlfCGtmk2jRVsbb6aGP/view?usp=sharing I couldn't get it to upload here. Took too long. I'll tinker with it some more on my end.