Pls try to print it

[Kepanin 0]

Hi, im very interested in making stamps on 3d printer but im not shure is it possible. I try same object on Form1+ and it was not enough quality. Can someone try it on ultimaker? http://www.megafileupload.com/4Pcm/example.stl

[gr5 2,189]

The form1+ has much better resolution than the Ultimaker. But if you really want to try it, you should use 3dhubs.com. That website will allow you to find an individual to print something for you using any type of printer you choose. There is probably someone even nearby where you live and you can go visit the person and the printer when your part is ready and you can discuss 3d printing issues with that person.

[johannesk91 15]

What a nice test for the tiny nozzle.

Result ist pretty good for an UM2 and my second print with this nozzle size .15

Thanks to @swordriff and his Shop 3dsolex, wasn't able to print it with an .25 nozzle.

[gr5 2,189]

I have found that you can set nozzle size to lower values than the actual nozzle size by about 25% - so .3mm for a .4mm nozzle and 0.2 for a .2mm nozzle and so on.

This will look even better if you do it with 2 colors like this:

[gr5 2,189]

 

@johannesk91 - What temperature and speed did you use for this print?

[neotko 1,417]

I made a post a few weeks ago about using the nozzle to go 1.2 times less it's size on simplify3d (I bet on cura this it's also easy to do) https://ultimaker.com/en/community/view/16881-really-tiny-little-details-with-04-nozzle-s3d-umo-

I'll try to print your file tomorrow with a 0.4 to see how it looks but seems hard without a 0.25 nozzle

Edit. Wow this it's a hard think to print. Will try anyway

Edited August 10, 2015 by Guest

[johannesk91 15]

@gr5

Layer .06

Temp 230 normal i use 220 for this Material

Speed 30-40mm/s

[gr5 2,189]

Noted! If someone else ever asks I will point them to this thread plus I noted it for myself if/when I ever try it.

[Agis 0]

So what is the peg you can print with a UM2?

[gr5 2,189]

peg?