Jump to content

Cover Kit for Ultimaker 2 and Ultimaker 2+


Recommended Posts

Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+

Definitely not made by Ultimaker, but I have to say, I have one, and I like it so far. It's similar to the designs on YouMagine. In fact, the black plastic parts are printed in ABS. But it has a fan and filter up in the corner. So far, I've been using it for about 2 weeks for high temperature materials on a UM2+. I appreciate not having to smell any ABS while I work.

  • Link to post
    Share on other sites

    Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+

    Definitely not made by Ultimaker, but I have to say, I have one, and I like it so far. It's similar to the designs on YouMagine. In fact, the black plastic parts are printed in ABS. But it has a fan and filter up in the corner. So far, I've been using it for about 2 weeks for high temperature materials on a UM2+. I appreciate not having to smell any ABS while I work.

     

    Thank you for the feedback! I'm taking delivery of mine today. They talk about replacement HEPA Filters. Do you know where we get these from?

  • Link to post
    Share on other sites

    Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+

    It looks like Dynamism where you found the cover sells the replacement filters for $79 according to their site. I haven't gotten to the point of needing to replacement filter yet.

  • Link to post
    Share on other sites

    Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+

    It looks like Dynamism where you found the cover sells the replacement filters for $79 according to their site. I haven't gotten to the point of needing to replacement filter yet.

     

    Being that this thing is so expensive and can't find it anywhere except at Dynamism I want to get a spare in case they stop carrying this thing. Printing my first ABS from last night. No odor at all and temps inside are maintained perfectly. So far I'm impressed. I will post the link here as to where to get the filter from Dynamism as soo as I can find it. Thanks!

  • Link to post
    Share on other sites

    Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+

    Thanks! I've been pretty impressed with it so far too. I don't print ABS often, but when I print it, I like to raise the temp to 110 and any sort of airflow near the printer without the cover makes it hard.

  • Link to post
    Share on other sites

    Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+

    When I first saw the cover kit, I thought it was awsome... but after reading this thread, I'm not so sure. I don't quite like the idea that it is a 3rd party that is making. Also the fact that it is $400 doesn't help either.

  • Link to post
    Share on other sites

    Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+
    Link to post
    Share on other sites

    Posted · Cover Kit for Ultimaker 2 and Ultimaker 2+

    Here in Europe, we can get the "Ulti Top" for roughly 150,00 Euros, Front Doors are 50,00,- (here: http://3dprinterstore24.de/3D-Drucker-Gehaeuse:::383.html or Belgium here: http://www.ideato3d.be/boutique/upgrades/ultitop-for-ultimaker/ ) plus some smart person just released a mod to attach a hepa filter to it here: https://www.youmagine.com/designs/ultitop-filter

    Unfortunately i do not know anybody on the US side of the pond selling those.

    I am using the UltiTop because of my severe dust problems, the door i must admit i am too lazy to reattach most of the time. I like the top, and i think it helps but cheap it ain't either.

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
        • 0 replies
      • Ultimaker Cura 5.6 stable released
        Cura now supports Method series printers!
         
        A year after the merger of Ultimaker and MakerBotQQ, we have unlocked the ability for users of our Method series printers to slice files using UltiMaker Cura. As of this release, users can find profiles for our Method and Method XL printers, as well as material profiles for ABS-R, ABS-CF, and RapidRinse. Meaning it’s now possible to use either Cura or the existing cloud-slicing software CloudPrint when printing with these printers or materials
          • Confused
        • 48 replies
    ×
    ×
    • Create New...