Is there a UM Go + ?

[luisito 12]

Is there a version '+' for the UM Go?

[Labern 774]

Nope, but mine soon will be.

[luisito 12]

Nope, but mine soon will be.

But is the um2+ upgrade compatible with um go ?

[Labern 774]

No its not as the feeder is on the wrong side of the machine and won't fit.

[Dim3nsioneer 557]

Well now as the UM2+ files are out it should be possible to print a mirrored version of the feeder case?

[Labern 774]

This is what I have done.

It needs a few mods as there are stepper motor screws that it will hit.

Also it's a very complicated part so needs modifying to make it easier to print.

[meduza 191]

You could probably order it SLS printed from Shapeways or a similar service?

Or you can just use my belt geared feeder upgrade to get something similar to the 2+, should fit with no problems on the UM2Go: https://www.youmagine.com/designs/belt-geared-um2-feeder-upgrade

[Labern 774]

Yes but it will not fit inside the 2go carry case

[meduza 191]

No, that would need some modification to the case.

[neotko 1,417]

No, that would need some modification to the case.

 

Noone has tried to refit all the extruder into something smaller with the same parts?

[Labern 774]

I'm working on a solution.

[Labern 774]

I have Successfully printed my first parts with my UM2go+ Feeder and it worked really well. None of that tick tick tick you get when printing fast like the old feeder, I was printing with a 0.8mm Nozzle at 50mm/s and 0.25 layer height.