Jump to content

double fan


Recommended Posts

I had an extra connector in my junk drawer that I soldered on. I pulled out the pins of the original connector and then soldered the leads from my new connector to those before pushing them back in.

Not sure what you mean with the second question? No modifications should be needed for the fan.

  • Link to post
    Share on other sites

    Posted · double fan

    It is because I only have the connector selling wise the basic ultimaker, so I have to create a derivation to connect the two fan in the same plug. that is why i am wondering if i have to buy two fan witch need lees energies but I think that two fan of 12V 0,10 Am in derivation will plug white-out problem of energies ...

  • Link to post
    Share on other sites

    you need two normal fans, exavtly like the one that comes with the ultimaker.

    then elt off a little of the plastic around the existing power fan cables, soldier on the new fan cables, tidy it all up and.... your in business.

    here is my design.

    http://www.thingiverse.com/thing:35365

    its working well on both my ultimakers.

    Ian :-)

  • Link to post
    Share on other sites

    Posted · double fan

    nice

    can you give me more information about the connection like photos ? I am not sure how to do ... connect directly the to new conector red on the red of the plug and the two black on the black plug ?

  • Link to post
    Share on other sites

    Posted · double fan

    I am getting this back, I am looking for good double fan duct for the original machine.

    I printed IRobert design from youmagine and then realized that its for smaller fans, which double fan do you recommend guys?

    I have two fans from the exact same since as the original one.(50mm in the outside, 40mm between holes (Which I think It was broken because it made some noise at the beginning)

    fan two fans

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...