Cura 2.3.1 Brim bug

[amagro 3]

The "Brim only on the Outside" function is not working in the best way.

Has you can see in the imagens, after selected that option, brim still appears in the inside.

Brim only on the Outside unchecked

Brim only on the Outside checked

[thopiekar 46]

Thanks you for the report. I'll forward it to our developers.

Is your model uploaded anywhere, so we could reproduce it?

Thanks again!

[JohnK 30]

Yes, I also had that happen with the Ultimaker Drill print as can be seen in this pic

[WVUTampaAlum 0]

I have issues with the brim printing too close to the object and sticking to the bottom layer. Anyone else with this, is there any setting to print brim x mm from object?

[thopiekar 46]

Thanks! Reported it at: https://github.com/Ultimaker/Cura/issues/1166

[ghostkeeper 105]

It still tries to create a brim on the outside of the inner pieces of the B. That is expected.

Why it then seems to create the brim from both sides is a bit weird though.

[gr5 2,194]

I have issues with the brim printing too close to the object and sticking to the bottom layer.  Anyone else with this, is there any setting to print brim x mm from object?

 

lol - that's the whole point of brim. If it doesn't stick to the part then the part is more likely to fall off. But definitely you can do this. It's called "skirt". So just turn off brim and you will get a skirt instead which is like brim but is not touching the part.