SOLVED Cura 3.0.3 filling in holes

[sinned 0]

Hi all-

I update to Cura 3.0.3. I was using the Wanhao edition of Cura previously. Worked fine for me, thought to jump to the newest yesterday. When I read the FAQ, I understood that 3.0.3 would migrate settings if installed side by side to the old version.

Here is screenshot of some gears I am trying to print. 3.0.3 is infilling the bore. This is under both recommended and custom settings.

In 3.0.3 the Mesh Fixes -> "Remove all holes setting is unchecked.

I used the same .stl that I generated from AutoCAD for all 3 gcode generations. I put it into S3D too to check the model.

What am I missing that would infill the bore of the model?

TIA

[burtoogle 514]

Hi, could you please post links to the model (stl) and the gcode that doesn't have the hole. Thanks

[Dim3nsioneer 557]

Disable "Union Overlapping Volumes" in the "Mesh Fixes" section. If your model has the surface normals wrong for the holes this option closes the holes.

[sinned 0]

Thanks Dim3nsioneer, that seemed to fix it. I will look at how I modeled the part with blocks/arrays. I wonder if that caused the issue.

Sometimes I think that AutoCAD exports to like it used to print in the pen plotter days- by order drawn not by position. The travels in my models seem ridiculous.

sinneD

[stark002 0]

I have the same problem with these files.

and nothing I do seems to work, it's like the hole on the bottom doesn't exist!

Storm_Breaker_011.stl Storm_Breaker_012.stl Storm_Breaker_013.stl Storm_Breaker_014.stl Storm_Breaker_015.stl