Problems with structure

[DrTs 0]

Hello, I hope somebody can help me

From the first day I have problems with the results on my Ultimaker 2+

Please have a look on this pictures

[media-thumb=72867][media=72868]

[/media][/media-thumb]

I use a spray for coating the builder plate. It normally works well.

I hope somebody can help me.

[gr5 2,189]

That's underextrusion because the nozzle is too far form the glass. Simply turn the 3 leveling screws CCW 1/2 turn to move the glass closer to the nozzle. Don't bother rerunning the leveling procedure.

[DrTs 0]

Sorry it was my first post and I expected an email, if sombody answer me.