Hey,
No, I've not tried other cables or Programms yet. The car is about 70 cm long.
fbrc8-erin 287
I would try and connect it to another program with that cable and see if you get a connection. Here's the link for Pronterface: http://www.pronterface.com/
If that fails, I would try a different/shorter cable.
-
1
I had the same problem for some reason with the newer versions of Cura - I now keep ver. 2.5 just for firmware updates!
Might be worth a try?
-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
fbrc8-erin 287
How long is the USB cable you're using?
Can you connect the printer to your computer successfully with other programs? (Pronterface is a good choice.)
It could be an issue at the board, but it could also be a cable issue. Super long cables can time out while trying to transfer the data. Have you tried more than one cable?
Link to post
Share on other sites