Dim3nsioneer 558
14 hours ago, ultiarjan said:some resellers do a good job of listing all parts on there webshop, but unfortunately most dont.
Most of the usually not displayed parts are not used very often. So the effort for making them presentable on the webshop might be a bit too big, especially for tiny parts in the low Euro or even Cent regime.
-
1
Recommended Posts
ultiarjan 1,223
I guess you need one of these? every re seller should be able to get it for you. Usually it works the quickest if you give them the Ulitmaker part number (see below)
some resellers do a good job of listing all parts on there webshop, but unfortunately most dont.
http://www.mindkits.co.nz/ultimaker-parts.aspx?ps=240
another good source is the Ultimaker Github , specially the BOM and the 3D model;
https://github.com/Ultimaker/Ultimaker3
Link to post
Share on other sites
fbrc8-erin 296
I've got those live on my store https://fbrc8.com/collections/ultimaker-3-spare-parts/products/lifting-switch-pack-um3-um3x , but since you're in the Netherlands, @Andre64, I'd try reaching out to your reseller again to save yourself on shipping costs. You might also have better luck with another reseller in Europe.
Like @ultiarjan says, any reseller should be able to order them in on request, but most won't have them listed.
Link to post
Share on other sites