Jump to content

Difference in Cura between U2E+ and U3E


Hero_s

Recommended Posts

Posted · Difference in Cura between U2E+ and U3E

Hi, I wanted to know which hidden setting is the cause for this difference between the number of meters and the print time of the same model, but on two different printers. As you can see, the print on the U3E takes 7h32 min with 9,16 m while the same stl on the U2E takes 6h41 min and 8,70 m.

 

 363032104_Capturedecran2019-01-04a13_46_04.thumb.png.674f8be65e0193f55a08968cc674df00.png97858885_Capturedecran2019-01-04a13_46_52.thumb.png.6ea8ddd09ac6b4fac8503a46d74aef3c.png

 

Both print setup have a grid infill pattern at 20%, the same brim and the same layer height. From what I see, they are identical.

 

I use Cura 3.4 since my computer's software is too old to support the newer versions. I noticed this difference between the printers on other models too. So, any idea on what could be different in this case between the two printers?

 

Sandrine

  • Link to post
    Share on other sites

    Posted · Difference in Cura between U2E+ and U3E

    The weight of the heads is different, as is the internal geometry of the hotends / nozzles. This means that in order to get the same level of quality, settings need to be different. Usually this means that we have to tweak the acceleration / jerk settings, which will in turn influence the print time.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...