UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Try a couple of these custom supports? They might work for your model. But don't expect miracles, it will allways be ugly. The ribs allow to make the gap smaller, without the support totally fusing with the model. If you provide enough methods for removing the support later (separate parts, holes for hooks and pliers, handles to wiggle things loose,...) you can also reduce the gaps. Making the support extend a bit (see bottom right in first pic) lets the model adhere better.
The bridge in the last two pictures uses a separate support-bridge, so the supports don't go all the way down and don't destroy the text. It also has ribs for smaller vertical gaps.
Maybe the same results can be achieved with standard supports in Cura nowadays. But I prefer to design my own custom supports, due to my often small or specialised models.
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
geert_2 558
Try a couple of these custom supports? They might work for your model. But don't expect miracles, it will allways be ugly. The ribs allow to make the gap smaller, without the support totally fusing with the model. If you provide enough methods for removing the support later (separate parts, holes for hooks and pliers, handles to wiggle things loose,...) you can also reduce the gaps. Making the support extend a bit (see bottom right in first pic) lets the model adhere better.
The bridge in the last two pictures uses a separate support-bridge, so the supports don't go all the way down and don't destroy the text. It also has ribs for smaller vertical gaps.
Maybe the same results can be achieved with standard supports in Cura nowadays. But I prefer to design my own custom supports, due to my often small or specialised models.
Link to post
Share on other sites