printing with 2 colors

[Fritzi16_2 0]

Hi, Im trying to print with to colors. It is a single object and I cant split it in multiple objects. Is there an option in Cura to change the selected Printcore at layer x? Like the script "Filament Change", but for Printcore/material.

 

Thanks for your time, Fritzi16_2

[Bruce19 2]

Thanks to MARI she sent me this   

 

[Fritzi16_2 0]

Yeah, that works. But my intension is to switch from extruder 1 to extruder 2 at layer x. Changing the Filament manually takes time and the worst, it takes a human.

[Smithy 1,145]

You can only do that when your model is split in two parts. In Cura you can say, print part 1 with Extruder 1 and part 2 with the other extruder. It is not possible to change the extruder at a specific layer number.

[Fritzi16_2 0]

ok, that sucks but thanks a lot!

[Smithy 1,145]

If you don't have any CAD software or experience with it, search for some online tools. I am sure there are some tools where you can upload an STL and split it into 2 parts. 

 

Some time ago there was such an online service of Prusa, but I am not sure if it is still online, because they built in the functionality into the PrusaSlicer.