Jump to content
gisley

Need help with dimensions in and out of Fusion 360

Recommended Posts

Posted (edited) · Need help with dimensions in and out of Fusion 360

I am printing the Prusa PPE face shields.  I brought the stl part into Fusion360 to tinker with it.  The imported dimensions were grossly off compared to the real dimensions. See the values below.  The drawing on the right is my redesign.  When I send it to Cura 4.6 the model is in a very small size.    Cura does not show  the dimensions I used but on the build plate and in real life the print is very small.  I could use some explaining, please.

Screen Shot 2020-04-23 at 4.31.11 PM.png

Screen Shot 2020-04-23 at 4.29.48 PM.png

Screen Shot 2020-04-23 at 4.36.50 PM.png

Edited by gisley

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...