Print Bed completely turned wrong

[mazman22 0]

Long time user. Updated to Cura 4.7 and when selected my Tevo Turantula Pro in the program, this is what happens. Is there a option or setting so I can lay the bed down to match the cube or rotate the cube to line up with the bed? Bed size is correct and I've never had this problem with any other versions. 

[GregValiant 1,276]

It looks like the cube is sitting on the build plate correctly.  That other vertical shape is a definite oddity.  In the second image it almost looks like a shadow of the cube and the Z axis.  Does it slice OK?

 

If worse comes to worst you could mount the printer on a wall to keep the Z axis aligned with the software.  Drywall screws would probably be OK.  They should be the store-bought kind though.  Printed ones just don't last.

[mazman22 0]

The cube was just for reference. If anything is placed behind that vertical oddity, it will not print

[nallath 1,123]

This is our bad (bed, heehehe get it?). We switched all the build plates to 3mf to make it the cura image smaller, but we didn't save this one correctly.

 

It has been fixed for 4.7.1, which should be out anytime now.

[mazman22 0]

Ok, Thank You. I'll keep a eye out on the update

[nallath 1,123]

It's available now.