Jump to content

S5 high pitched whine


Hops

Recommended Posts

Posted · S5 high pitched whine

Hi, Have had an S5 for about a week or 2 now and since day one its been making this high pitched whining sound coming from inside the machine. Sounds like how capacitor whine sounds in old video cards.

 

It's causing some people to be quite annoyed in the office.

 

 

 

  • Like 1
Link to post
Share on other sites

Posted · S5 high pitched whine

Thanks for the reply. Unfortunately dimming the light between 0 and 100% makes no difference in the pitch or volume of the whine. Nor does raising or lowering the bed 😞

  • Link to post
    Share on other sites

    Posted · S5 high pitched whine

    Often such a high frequency "whine" occur in the power supply, try to tilt the printer a little to one side, in order to hear if this whining is created under the printer (where the PS (power supply) is located.

    Those PS operate at high frequency and can sometimes make such noise if the coils potting is in suficient.

     

    Thanks

    Torgeir

     

  • Link to post
    Share on other sites

    Posted · S5 high pitched whine

    Hei.  Tried it and its Peetri quite under the printer. Its coming from inside. Maybe a stepper motor? Guess I should get in contact with the reseller and ask about warrenty 

  • Link to post
    Share on other sites

    Posted · S5 high pitched whine

    Hei der.

     

    Do you also have this whine after printing?

    Most printers release the power to the steppers after a completed print. Hmm, but not sure if the S5 do this..

    Anyway, it's a good thing to contact the reseller.

     

    Good luck.

     

    Torgeir.

     

  • Link to post
    Share on other sites

    Posted · S5 high pitched whine

    I also have the same problem with my S3. Also the Hotend and they light up blue as well. I called service, the tech said it's the internal fans, I verified they are not running, another remark was "if it's working, it's alright". Can't stand the height pitched noise!  I'm going to call them again to resolve this issue.

  • Link to post
    Share on other sites

    Posted · S5 high pitched whine

    P.S. I check the two units at work and they don't have this issue....

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...