Ender 3 pro bad printing

[vykeymasmaya 0]

I am getting this kind of issues when printing. Printing is not good and I have used super quality settings in the cura software. Need help to get rid of this problem. Kindly let me know how to solve the issue.

 

[Mari 36]

...it's hard to tell what the exact problem is by watching at the photographs... please attach the project-file so we can see you printer and cura settings...

 

Did you manage to get a good print with one of the other profiles?

[brtzor 0]

I had the same because of Bowden tube. It swelled due to high temperature.

It can also be:

- gap between nozzle and Bowden tube 

- too much retraction distance

- nozzle clogged 

Edited December 12, 2020 by brtzor

[GregValiant 1,320]

Yes, severely under-extruded.

The Extruder steps/mm may need calibration.

The printer and/or Cura have been set to Volumetric extrusion.

As @brtzor says, it could be a problem with the printer.

Both Mari and I have Ender 3 Pro's.  For myself it was always a blocked bowden tube at the hot end from heat creep.  I finally gave up and went with an all metal hot end.  Not perfect, but it's much much better.