The numbers appear correctly in the original form of the piece, but after slicing the numbers do not come out correctly

[tarikkah 0]

ctrlV_3D_test.stl

[Torgeir 244]

Hi @tarikkah,

 

Welcome in here.

 

This is a good observation..

I'll think this have something with really small "mesh" surface that's to small in order to make proper digit, like in this print.

So Cura made it this way, in order to be readable, I'll think..

If you choose surface mode you'll see the original "mesh" digit..

 

Just a thought..

 

Anyway, there sure might be another explanation?

 

Thanks

Torgeir

Edited December 14, 2020 by Torgeir
Text error.

[ahoeben 1,953]

25 minutes ago, Torgeir said:

So Cura made it this way, in order to be readable, I'll think..

 

No, Cura made it this way because the details are smaller than the nozzle size (or actually the line width). You'll likely get more details if you turn on the "Print Thin Walls" setting.

[tarikkah 0]

Thanks for help. the problem was caused by nozzle size. I changed my nozzle size 0.4mm to 0.2mm in cura . Then it fixed.