Jump to content

NEW S5 does cancel Print Job immediately


Desprinzla

Recommended Posts

Posted · NEW S5 does cancel Print Job immediately

Dear all, this is my first Thread as new owner of S5 Pro Bundle,

 

when I start a print job, regardless of whether it is from the cloud or a USB stick, the printer stops immediately and says the print job is finished.
Why is that, especially since I've been printing permanently for the last 10 days.
Since just now, as soon as I want to start a print job, the waiting circle on the display starts to rotate, rotates 360 ° and says done! even though he hasn't even started printing.
Also when staring at an XY offset calibration, the same thing. he turns the waiting clock once and says done.
I've only had this since I had to reset everything to the factory settings because a print job was in nirvana as a continuous loop.
Who can help me here ?
lg Giudo

  • Link to post
    Share on other sites

    Posted · NEW S5 does cancel Print Job immediately

    Did you look at your part in PREVIEW mode in the slicer?  That will let you know if there is anything to print.  There could be a problem with your model (for example walls too thin) where there is actually nothing that can be printed with the current Cura settings.

  • Link to post
    Share on other sites

    Posted · NEW S5 does cancel Print Job immediately

    yes this is all ok, also i did print this part before, as suggested from Torgeir in Tread below i disabled the Material Station and now it works.

    So you think its an Problem with the Material Station???? ot the connection?

     

  • Link to post
    Share on other sites

    Posted · NEW S5 does cancel Print Job immediately

    even though i had new Firmware i did update it with same 6.1.1 Firmware and it works. All solved

    • Like 1
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...