Here is a project file of both the 30mm circle and the 40mm circle.
Indeed strange, like @obewan it is working correctly in 4.8.
But if I multiply your 40mm circle in 4.9 and make it 30mm it is printing from inside-out.
Strange, loading your project into cura 4.8, both discs print from inside-out, but not in ver 4.9
Indeed strange, like @obewan it is working correctly in 4.8.
But if I multiply your 40mm circle in 4.9 and make it 30mm it is printing from inside-out.
Recommended Posts
fvrmr 73
Hi @lewis1im did you try to import the 30mm circle in the same project of 40mm?
If you want you could share your project file (file - save project) of both circles and then I can take a look.
Link to post
Share on other sites