UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
This problem is rare on the S5 but common on 3d printers in general and has about 30 (very different) possible causes. So the first thing is to figure out if the problem is at the feeder or the hot end. I'm guessing the hot end (the core).
So try a different core. Your printer should have come with two AA 0.4 and one BB 0.4 cores so swap the AA 0.4 cores. Alternatively move the core to the right and slot so that you are using the right hand feeder and if it suddenly works great than the problem is with the left hand feeder.
I'm guessing there is a clog or partial clog in your nozzle. Not too hard to fix with a few cold pulls. Cold pulls are done from the menu system on the S5.
Just to give you an idea - here is a post with the list of all the things that can cause underextrusion (which causes ground up filament at the feeder) but for a UM3 since the S5 is easier to diagnose and more reliable (I mean just swap cores).
Actually glancing at that list another issue is printing too fast. That can cause underextrusion/grinding as well. It might help to read the whole list briefly and something might jump out at you - for example if your air temp is 90F/30C.
The message One material appears to be empty in this case means that the flow sensor is detection that filament is not running in the correct amount (too little). As you confirm, the filament is grinding.
Make sure you are:
- using Ultimaker filament
- using Ultimaker Cura profiles default
- import a cube of 30mm of side and create a simple print job
- clean the feeders and keep the indicator in the middle
- try to print it
- when the print starts, make sure the front fan is running
- check that the print cores have less than 1000 hours or else replace them
If this didn't fix it.
Contact your reseller and ask for support or a checkup.
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
gr5 2,224
This problem is rare on the S5 but common on 3d printers in general and has about 30 (very different) possible causes. So the first thing is to figure out if the problem is at the feeder or the hot end. I'm guessing the hot end (the core).
So try a different core. Your printer should have come with two AA 0.4 and one BB 0.4 cores so swap the AA 0.4 cores. Alternatively move the core to the right and slot so that you are using the right hand feeder and if it suddenly works great than the problem is with the left hand feeder.
I'm guessing there is a clog or partial clog in your nozzle. Not too hard to fix with a few cold pulls. Cold pulls are done from the menu system on the S5.
Just to give you an idea - here is a post with the list of all the things that can cause underextrusion (which causes ground up filament at the feeder) but for a UM3 since the S5 is easier to diagnose and more reliable (I mean just swap cores).
Actually glancing at that list another issue is printing too fast. That can cause underextrusion/grinding as well. It might help to read the whole list briefly and something might jump out at you - for example if your air temp is 90F/30C.
Link to post
Share on other sites
LeonardoFlorianAMG3D 2
The message One material appears to be empty in this case means that the flow sensor is detection that filament is not running in the correct amount (too little). As you confirm, the filament is grinding.
Make sure you are:
- using Ultimaker filament
- using Ultimaker Cura profiles default
- import a cube of 30mm of side and create a simple print job
- clean the feeders and keep the indicator in the middle
- try to print it
- when the print starts, make sure the front fan is running
- check that the print cores have less than 1000 hours or else replace them
If this didn't fix it.
Contact your reseller and ask for support or a checkup.
Link to post
Share on other sites