CC 0.6 Red reported by Ultimaker S3 as CC

[apurgue 0]

I just installed for the first time a brand new CC 0.6 red i had bought a few months ago. The printer reports it as CC with no size suffix. There is no option for a print core CC within Cura only CC 06 and CC04. I chose CC06 but the printer complains about a mismatched configuration. Forcing an override causes the printer to complain that the head as timeout before reaching temperature. This is in fact not true as the error is issued while the temperature of the nozzle is already 260C which is the target value. I suspect that the head is 1) faulty or 2) no longer supported by the firmware (7.0.1). Has anyone else experience this issue? Any suggestions as to what to try?

Thanks

 

Alejandro

Edited January 4, 2022 by apurgue
Misspelled word

[gr5 2,194]

The eeprom on the core is supposed to have a string on it: "CC 0.6" as ascii characters.  Either the eeprom flipped a bit (space is 32, null is 0, 32 is 2^5 so it's like that single bit is bad) or there was a bad connection when plugging it in.

 

Definitely try unplugging and pushing in the core more firmly a second time.

 

Also it is possible to reprogram the core.