If it is only for one print (e.g. to test it), you could manually edit the gcode-file in Notepad, Notepad++, or a similar plain-text editor.
But be aware that if you insert wrong codes, you could make the head crashing into things and damage it. Or you could burn the plastic in the nozzle by heating it too hot for too long.
Recommended Posts
ahoeben 1,981
If you want to change the behavior at the end of the print-job, then the End G-code section in Manage Printers (or the Printers pane of the Preferences)-> Machine Settings is the best place.
Link to post
Share on other sites