UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Posted
(edited)
· Ultimaker S5 bed levelling probe pattern
You can find this into in /usr/share/griffin/griffin/machines/9051.json
"bed_level_probing": {
"use_footprint_probing": true, // Whether or not to just probe the footprint of the object
"probe_selection_method": "mode",// Choose 'frequency' or 'mode' (default)
"spacing": 40, // [mm] probing grid spacing. Value based on axis circumference.
"margins": {"left":8, "right":15, "front":10, "rear":30},
"dimension": {"width":340, "height":247},
....
Posted
(edited)
· Ultimaker S5 bed levelling probe pattern
cheers Tom, thats great. It kinda gives some clues but its pretty difficult to get that accurate as i assume its taking into account the position of the nozzle in relation to the carriage etc. Even so, thanks a lot for it.
Id worked out myself that 40mm square is was the way to go and through trial and error ive got it pretty much bang on in terms of margins.
Obviously this is pretty useless to most, but it means i can position my models around the impact marks in the kapton made from the red hot nozzle probe. Be nice if the probe was done with a cold nozzle really, as it cools as it goes. For example as the probe goes right to left impact marks get less and less until none at all, so Ultimaker saying the nozzle needs to be hot to get an accurate result doesn't really ring true.
I know people say its not designed for the use of kapton, but it means i can get an absolutely mirror finish on my model face so no post-production required, no brim at all to remove, zero warping and no cleanup.
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
tomnagel 126
You can find this into in /usr/share/griffin/griffin/machines/9051.json
"bed_level_probing": {
Edited by tomnagel"use_footprint_probing": true, // Whether or not to just probe the footprint of the object
"probe_selection_method": "mode",// Choose 'frequency' or 'mode' (default)
"spacing": 40, // [mm] probing grid spacing. Value based on axis circumference.
"margins": {"left":8, "right":15, "front":10, "rear":30},
"dimension": {"width":340, "height":247},
....
deleted unneccessry lines
Link to post
Share on other sites
Super_paulie 13
cheers Tom, thats great. It kinda gives some clues but its pretty difficult to get that accurate as i assume its taking into account the position of the nozzle in relation to the carriage etc. Even so, thanks a lot for it.
Id worked out myself that 40mm square is was the way to go and through trial and error ive got it pretty much bang on in terms of margins.
Obviously this is pretty useless to most, but it means i can position my models around the impact marks in the kapton made from the red hot nozzle probe. Be nice if the probe was done with a cold nozzle really, as it cools as it goes. For example as the probe goes right to left impact marks get less and less until none at all, so Ultimaker saying the nozzle needs to be hot to get an accurate result doesn't really ring true.
I know people say its not designed for the use of kapton, but it means i can get an absolutely mirror finish on my model face so no post-production required, no brim at all to remove, zero warping and no cleanup.
Edited by Super_paulieLink to post
Share on other sites