Cura Arachne Z Seam

[deathcoretm 0]

Hi, when slicing, random layer change points remain, I set the positions of the Z seam in different ways and this does not help. wall thickness in a 3D model of the same thickness.

[Smithy 1,144]

Do you use the latest Cura 5 or still the Arachne Beta?

[deathcoretm 0]

I am use Arachne version, beacuse in standard Cura i cant print thin walls. In Arachne all ok with thin walls

[Smithy 1,144]

And have you set the Z-Seam to a fixed position?

 

The Arachne was the beta version of Cura 5, so could be that when there was a bug that it is fixed in Cura 5. But not sure if this is a bug or not.

[deathcoretm 0]

Use latest Arachne version. Look on another 3d model. 

[ahoeben 1,955]

Arachne has been merged into Cura 5. There will be no more Arachne builds, but Cura 5 will get continued development. Use Cura 5 now, instead of the Arachne test builds.

[deathcoretm 0]

Have same problem in Cura 5

[ahoeben 1,955]

It looks like this is a known issue with Cura 5 (and Arachne before it):

https://github.com/Ultimaker/Cura/issues/11877