Jump to content

UM2+ keeps rebooting/power-failing

schamar

By schamar
in UltiMaker 3D printers

 Share

Recommended Posts

schamar

schamar 2

Posted
Posted · UM2+ keeps rebooting/power-failing

After 3.5 yrs of extremely reliable operation, my UM2+ recently started to quit printing due to a power fail and reboots. This happens when

- printing from SD as well as USB

- pre-heated as well as cold

- using different models

- using different slicers (Simplify3D & Slic3r/PrusaSlicer)

- using different filament

 

It happens either directly after heating bed and nozzle, or a few minutes into the print. (I have a video of the failure if that helps, but didn't attach it here)

 

Can anyone help me? Thanks in advance

    • Link to post
    Share on other sites
    gr5

    gr5 2,173

    Posted
    Posted · UM2+ keeps rebooting/power-failing

    This is pretty common.  The power bricks are running close to their limit and can age.  I'd get a new one.  There are software solutions as well.  MUCH more info here:

     

     

    • Like 1
    Link to post
    Share on other sites
    • gr5 locked this topic
    Guest
    This topic is now closed to further replies.
     Share
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...