What do you mean that it is at "any printer"? Is that some web based slicing software or something? Are you running cura yourself or some service running cura? I'm a bit confused about this aspect of your question.
This might be helpful althoughy you never clarified what you want to do:
-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
gr5 2,194
Can you be more specific? There are
1) the edge boundaries,
2) there is the feature where you can't get 2 parts on top of each other (which can also be disabled),
3) there are the clips that hold the glass and those areas are disallowed also.
And more but those are most likely what you mean.
Did you mean #3? Did you remove the clips from your printer? Or is your print/model bigger as you get above the clips? Or do you mean one of the other things I mentioned?
Also the answer will probably require editing a file and the file location depends whether you have linux, ios, or windows. So what operating system are you running cura in?
Link to post
Share on other sites